2009 Ford E-250 Recalls
What To Do If Your E-250 Has Been Recalled
The following recalls have been announced by Ford, so if you own a 2009 E-250 take action immediately to get your automobile fixed. Interested in how this information is collected? Read more about recalls and the NHTSA.
- Call Ford to get more information. Verify that the cost of repairs will be covered free of charge.
- Setup an appointment with a local authorized mechanic to schedule your maintenance.
- Keep up to date with recalls for your vehicle by following this page.
Recent 2009 E-250 Recalls
-
FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM Recall for 2009 Ford E-250
Summary: Roush is recalling certain model year 2009-2011 Ford E-150, E-250, and E-350 5.4L engin vans/wagons/cutaways, and model year 2010-2011 Ford E-450 6.8L engine cutaway vehicles altered by rouch to operate using the roush branded cleantech propane autogas fuel system. The fuel rails included in the kits contain improperly seated injector retention clips. This could result in leakage of propane autogas.
Consequence: A propane leak in the presence of an ignition source can result in a fire.
Fix: Roush will notify owners of the vehicles of which the kits were installed in order to arrange for free replacement of the injector retention clips. The safety recall began on September 26, 2011. Owners may contact roush at 1-734-466-6255.
For detailed information & supporting documents, see the official NHTSA page concerning recall #11V450000 »
-
FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM Recall for 2009 Ford E-250
Summary: Roush is recalling certain aftermarket roush clean tech liquid propane autogas fuel system kits used for installation on the following vehicles: Model year 2007 and 2008 Ford E-350 (duel rear wheel), MY 2009-2011 Ford E- 150, E-250, and E-350, and MY 2009-2011 Ford E-450 cutaways. The fuel rails included in the kits contain improperly seated injector retention clips. This could result in leakage of propane autogas. The part numbers of the affected kits are: P07C2-176kit-ab, P10C2-rcommkit-ab, P10C2-R150kit-aa, P10C2-R150kit-ac, P10C2-R350kit-ac, P11C2-R150kit-aa, P11C2-R150kit-ab, P11C2-R350kit-aa, P11C2-R350kit-ab, P10-so-rkit-ba, pbc2-rkit158-ab, pbc2-rkit176-ab, and pbc2-rkitmb-ac.
Consequence: A gas leak in the presence of an ignition source can result in a fire.
Fix: Roush will notify owners of the vehicles of which the kits were installed on in order to arrange for free replacement of the injector retention clips. The safety recall began on September 29, 2011. Owners may contact roush at 1-800-59-rouch (1-800-597-6874.
For detailed information & supporting documents, see the official NHTSA page concerning recall #11E033000 »
-
FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS Recall for 2009 Ford E-250
Summary: Roush is recalling certain aftermarket roush clean tech liquid propane autogas fuel system kits produced between December 17, 2010, and May 6, 2011, used for installation on fleet vehicles model year 2009 through 2011 Ford E-series vans/wagons/shuttles/cutaway (150, 250 and 350) with 5.4L engines ("E-series"), and MY 2011 Ford E-450 cutaways. The valves installed in the service port of the fuel rails of the kit were under minimum specification for the diameter. This led to insufficient compression of the O-ring, allowing leakage of propane autogas. The part numbers of the affected kits are: P10C2-R150kit-aa, P10C2-R150kit-ac, P10C2-R350kit-ac, P11C2-R150kit-aa, P11C2-R150kit-ab, P11C2-R350kit-aa, P11C2-R350kit-ab, P-10-so-rkit-ba, pbc2-rkit158-ab, pbc2-rkit176-ab, and pbc2-rkitmb-ac.
Consequence: A gas leak in the presence of an ignition source can result in a fire.
Fix: As of May 27, 2011, roush had notified all owners of record by telephone and shipped to them replacement valves free of charge. Owners may contact roush at 1-734-466-6255.
For detailed information & supporting documents, see the official NHTSA page concerning recall #11E019000 »
-
EQUIPMENT ADAPTIVE Recall for 2009 Ford E-250
Summary: Mobility transportation (mts) is recalling certain model year 2007 through 2009 conversion vans built on Ford E150, E250, and E350 chassis from September 16, 2008 through April 15, 2009 and fitted with ricon public use lifts. The restraint belt on these lifts was designed to prevent the lift from moving, unless the tongue of the belt is fully engaged and latched in the buckle. Ricon has discovered, however, that it is possible for the operator to insert the belt tongue into the buckle without fully engaging the latching mechanism. In this case, the restraint belt would appear to be latched, and the operator could run the lift. If the restraint belt tongue is not fully engaged into the restraint belt buckle, and latched, the lift may operate with an occupant on the platform.
Consequence: The user of the lift could be injured should the lift move without the restraint belt properly buckled.
Fix: Mts is working with ricon and ricon will be performing the remedy for this campaign. Please see ricon's defect report 09E-060. Ricon will provide customers with a warning decal and a dvd-based training aid. The safety recall began on October 18, 2010. Owners may contact ricon at 1-818-267-3000 or mts at 1-734-453-6452.
For detailed information & supporting documents, see the official NHTSA page concerning recall #10V242000 »
-
EQUIPMENT ADAPTIVE Recall for 2009 Ford E-250
Summary: Mobility transportation (mts) is recalling certain model year 2007 through 2009 conversion vans built on Ford E150, E250, and E350 chassis from September 16, 2008 through April 15, 2009 and fitted with certain ricon S series and K series L-model wheelchair lifts. Due to a problem in the software that controls the lift's "up" function, should the "up" button be released before the floor level limit switch is activated, the lift may continue its upward travel and may overrun the floor level cut off point.
Consequence: When the platform overruns the vehicle floor level and stops at an angle from 15-20 degrees, it is possible for a person in a wheelchair to tip over and for someone standing on the platform to fall, possibly resulting in injuries.
Fix: Mts will notify owners and the repairs will be performed by authorized ricon dealers free of charge. A software solution for this safety defect is under investigation. Until the software solution is available, ricon will provide owners with a bulletin outlining proper wheelchair lift operation and will ship owners a dvd-based training aid to promote proper lift operation at no cost. The safety recall began on October 18, 2010. Owners may contact ricon at 1-818-267-3000 or mts at 1-734-453-6452.
For detailed information & supporting documents, see the official NHTSA page concerning recall #10V243000 »
-
EQUIPMENT ADAPTIVE Recall for 2009 Ford E-250
Summary: Mobility works is recalling certain model year 2008 and 2009 conversion vans built on Ford E150, E250, and E350 chassis after November 2007 and fitted with ricon public use lifts. The restraint belt on these lifts was designed to prevent the lift from moving, unless the tongue of the belt is fully engaged and latched in the buckle. Ricon has discovered, however, that it is possible for the operator to insert the belt tongue into the buckle without fully engaging the latching mechanism. In this case, the restraint belt would appear to be latched, and the operator could run the lift. If the restraint belt tongue is not fully engaged into the restraint belt buckle, and latched, the lift may operate with an occupant on the platform.
Consequence: The user of the lift could be injured should the lift move without the restraint belt properly buckled.
Fix: Mobility works is working with ricon and ricon will be performing the remedy for this campaign. Please see ricon's defect report 09E-060. Ricon will provide customers with a warning decal and a dvd-based training aid. The safety recall began on August 20, 2010. Owners may contact ricon at 1-818-267-3000 or mobility works at 1-800-769-8267.
For detailed information & supporting documents, see the official NHTSA page concerning recall #10V206000 »
-
EQUIPMENT ADAPTIVE Recall for 2009 Ford E-250
Summary: Mobility works is recalling certain model year 2008 and 2009 conversion vans built on Ford E150, E250, and E350 chassis and Chevrolet 2500 chassis after November 2007 and fitted with certain ricon S series and K series L-model wheelchair lifts. Due to a problem in the software that controls the lift's "up" function, should the "up" button be released before the floor level limit switch is activated, the lift may continue its upward travel and may overrun the floor level cut off point.
Consequence: When the platform overruns the vehicle floor level and stops at an angle from 15-20 degrees, it is possible for a person in a wheelchair to tip over and for someone standing on the platform to fall, possibly resulting in injuries.
Fix: Mobility works will notify owners and the repairs will be performed by authorized ricon dealers free of charge. A software solution for this safety defect is under investigation. Until the software solution is available, ricon will provide owners with a bulletin outlining proper wheelchair lift operation and will ship owners a dvd-based training aid to promote proper lift operation at no cost. The safety recall began on August 20, 2010. Owners may contact ricon at 1-818-267-3000 or mobility works at 1-800-769-8267.
For detailed information & supporting documents, see the official NHTSA page concerning recall #10V207000 »
-
EQUIPMENT ADAPTIVE Recall for 2009 Ford E-250
Summary: Comm-trans is recalling certain model year 2007-2009 ada conversion vans built on Ford E-150, E-250, and E-350 chassis between December 7, 2007 and December 23, 2009 and fitted with certain ricon S series and K series L-model wheelchair lifts. Due to a problem in the software that controls the lift's "up" function, should the "up" button be released before the floor level limit switch is activated, the lift may continue its upward travel and may overrun the floor level cut off point.
Consequence: When the platform overruns the vehicle floor level and stops at an angle from 15-20 degrees, it is possible for a person in a wheelchair to tip over and for someone standing on the platform to fall, possibly resulting in injuries.
Fix: Comm-trans will notify owners and the repairs will be performed by authorized ricon dealers free of charge. A software solution for this safety defect is under investigation. Until the software solution is available, ricon will provide owners with a bulletin outlining proper wheelchair lift operation and will ship owners a dvd-based training aid to promote proper lift operation at no cost. The safety recall began on July 6, 2010. Owners may contact ricon at 1-818-267-3000 or comm-trans at 1-901-726-9394.
For detailed information & supporting documents, see the official NHTSA page concerning recall #10V153000 »
-
EQUIPMENT ADAPTIVE Recall for 2009 Ford E-250
Summary: Comm-trans is recalling certain model year 2007-2009 ada conversion vans built on Ford E-150, E-250, and E-350 chassis between December 7, 2007 and December 23, 2009 and fitted with ricon public use lifts. The restraint belt on these lifts was designed to prevent the lift from moving, unless the tongue of the belt is fully engaged and latched in the buckle. Ricon has discovered, however, that it is possible for the operator to insert the belt tongue into the buckle without fully engaging the latching mechanism. In this case, the restraint belt would appear to be latched, and the operator could run the lift. If the restraint belt tongue is not fully engaged into the restraint belt buckle, and latched, the lift may operate with an occupant on the platform.
Consequence: The user of the lift could be injured should the lift move without the restraint belt properly buckled.
Fix: Comm-trans is working with ricon and ricon will be performing the remedy for this campaign. Please see ricon's defect report 09E-060. Ricon will provide customers with a warning decal and a dvd-based training aid. The safety recall began on July 6, 2010. Owners may contact ricon at 1-818-267-3000 or comm-trans at 1-901-726-9394.
For detailed information & supporting documents, see the official NHTSA page concerning recall #10V151000 »
-
EQUIPMENT:ELECTRICAL:AIR CONDITIONER Recall for 2009 Ford E-250
Summary: E-N-G mobile system is recalling certain model year 2008 Chevrolet W5500, model year 2007-2009 Dodge 3500, model year 2009 mighty mover, model year 2006-2009 Ford E-250, E-350 and E-450, model year 2008-2009 GMC W4500, model year 2007 international 4300, model year 2009 Toyota land cruiser vehicles equipped with carrier airv ceiling units, model nos. 68rv0010ba, 68rv0012ca, and 68rv0010ea. The heater element in these assemblies may be defective which could cause the unit to create smoke or sparks.
Consequence: This defect could result in a fire.
Fix: E-N-G mobile system will notify owners and the vehicles will be repaired by carrier free of charge. Please see carrier's defect report 09E-053. The safety recall is expected to begin during December 2009. Owners may contact carrier at 1-877-584-7059 or E-N-G mobile system at 1-925-798-4060.
For detailed information & supporting documents, see the official NHTSA page concerning recall #09V434000 »