2001 Ford CROWN VICTORIA Recalls

Learn What to Do if Your CROWN VICTORIA Has Been Recalled

The following recalls have been announced by Ford, so if you own a 2001 CROWN VICTORIA take action immediately to get your automobile fixed. Interested in how this information is collected? Read more about recalls and the NHTSA.

  1. Call Ford to get more information. Verify that the cost of repairs will be covered free of charge
  2. Setup an appointment with a local authorized mechanic to schedule your maintenance
  3. Keep up to date with recalls for your vehicle by following this page

Recent 2001 CROWN VICTORIA Recalls

  • FUEL SYSTEM, GASOLINE Recall for 2001 FORD CROWN VICTORIA

    • Recall Announced JUNE 13 2006
    • NHTSA Reference #06E056000
    • Number Affected 58,640

    Summary: Certain aftermarket fuel filters sold under the purolator brand name, P/N F65277, shipped from January 16 through June 2, 2006, for use on the above listed passenger vehicles. Due to incorrect design, the quick connectors may not fully seat with the tube interface, even though the person making the connection may believe that the quick connector is fully attached.

    Consequence: Failure of this connection could lead to fuel spillage and, in the presence of an ignition source, a fire could occur.

    Fix: Ufi will notify owners and replace the filters free of charge. The recall began on August 4, 2006. Owners may contact ufi filters usa at 800-230-5876.

    For detailed information & supporting documents, see the official NHTSA page concerning recall #06E056000 »

  • FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY Recall for 2001 FORD CROWN VICTORIA

    • Recall Announced NOVEMBER 06 2003
    • NHTSA Reference #03V472000
    • Number Affected 4,218

    Summary: On certain natural gas vehicles, if a flame from a vehicle interior fire becomes locally directed at the natural gas fuel tank located immediately behind the rear seat, the flame could damage the fiberglass wrap on the tank weakening the tank.

    Consequence: If the strength of the tank is significantly compromised, it could rupture, increasing the risk of a fire.

    Fix: Dealers will install an insulator behind the current seat back. Owner notification began on January 7, 2004. Owners should contact Ford at 1-800-392-3673.

    For detailed information & supporting documents, see the official NHTSA page concerning recall #03V472000 »

  • FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY Recall for 2001 FORD CROWN VICTORIA

    • Recall Announced OCTOBER 15 2002
    • NHTSA Reference #02I003000
    • Number Affected 350,000

    Summary: In order to enhance police office safety, model year 1992-2003 Crown Victoria police interceptor (cvpi) vehicles will be equipped with shields designed to help protect the fuel tank in high-speed rear-impact crashes. Ford also will be offering an optional trunk package designed to improve the safe Transport of sharp-edged, heavy equipment in these vehicles.

    Consequence: Some high-speed rear-impact crashes have resulted in fuel tank punctures and fires in cvpi vehicles.

    Fix: Ford has advised us that shield kits have been available since late October and will be installed on police interceptor vehicles at no cost. The optional trank package will be available by the end of 2002. Ford has established a new web site at www. Cvpi. Com to answer additional questions about the safe use of cpvi vehicles.

    For detailed information & supporting documents, see the official NHTSA page concerning recall #02I003000 »

  • SEAT BELTS:FRONT:BUCKLE ASSEMBLY Recall for 2001 FORD CROWN VICTORIA

    • Recall Announced JULY 16 2001
    • NHTSA Reference #01V227001
    • Number Affected 1,400,000

    Summary: Vehicle description: Passenger and sport utility vehicles, pickup trucks, and minivans. Equipped with seat belts supplied by TRW. It is possible that the driver's and/or front passenger's outboard seat belt buckle may not fully latch. Ford Crown Victoria built at St. Thomas assembly plant from 4/17/00 - 5/29/01 Mercury Grand Marquis built at St. Thomas assembly plant from 4/17/00 - 5/29/01. Lincoln town cars built at Wixom assembly plant from 3/27/00 - 5/30/01. Lincoln Navigators built at Michigan truck plant from 4/11/00 - 5/31/01. Ford Windstars built at Oakville assembly plant from 3/23/00 - 5/30/01. Ford Rangers built at Twin Cities plant from 3/28/00 - 5/30/01, and also at the Edison plant from 3/13/00 - 5/25/01. Ford F-150 truck built at Norfolk plant from 4/18/00 - 5/25/00; at Ontario plant from 5/10/00 - 5/28/01; at Kansas City plant from 9/11/99 - 5/25/01; and at Cuautitlan plant from 5/16/00 - 6/9/01. Ford Super Duty F-250, F-350, F-450, and F-550 trucks built at Kentucky plant from 4/17/00 - 5/27/01; and at Cuautitlan plant from 5/16/00 - 6/19/01. Ford Excursions built at Kentucky plant from 4/17/00 - 10/2/00. Ford Expeditions built at Michigan truck plant from 4/11/00 - 5/31/01.

    Consequence: In the event of a crash, the restraint system may not provide adequate occupant protection, increasing the risk of personal injury to the seat occupant.

    Fix: Dealers will inspect the front outboard seat belt buckles and if the buckle fails the inspection process, it will be replaced. Owner notification began July 25, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Ford at 1-866-436-7332.

    For detailed information & supporting documents, see the official NHTSA page concerning recall #01V227001 »

  • AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE Recall for 2001 FORD CROWN VICTORIA

    • Recall Announced DECEMBER 06 2000
    • NHTSA Reference #00V412000
    • Number Affected 16,000

    Summary: Vehicle description: Minivans and passenger vehicles. A restraint control module (rcm) or a side or front crash sensor may have been assembled with one or more of the screws that mount the circuit board in the housing missing. If some or all of the screws are missing, the performance of the occupant restrains could be affected.

    Consequence: In some cases, less than the intended level of protection in the event of a crash.

    Fix: Dealers will inspect the rcm and crash sensors and, if necessary, replace them.

    For detailed information & supporting documents, see the official NHTSA page concerning recall #00V412000 »

  • AIR BAGS Recall for 2001 FORD CROWN VICTORIA

    • Recall Announced SEPTEMBER 13 2000
    • NHTSA Reference #00V270000
    • Number Affected 18,500

    Summary: Certain passenger vehicles, limousines, and mini vans were built with a newly designed restraint control module (rcm). In some cases, the rcm does not recognize certain system faults that could result in an air bag or seat belt pre-tensioner unexpectedly activating during the self-test sequence at vehicle start-up.

    Consequence: This condition could result in personal injury.

    Fix: Dealers will replace the rcm in these vehicles. Owner notification began September 14, 2000. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Ford at 1-800-392-3673.

    For detailed information & supporting documents, see the official NHTSA page concerning recall #00V270000 »

Add Your Complaint

Join thousands of frustrated Ford owners who have voiced their opinion and notified other consumers of issues at CarComplaints.com.

Most Common Ford Problems

Click the links above for additional details and any pending class action lawsuit information.

Ford Contact Information

Phone:
(800) 392-3673
Web:
Ford Customer Service
Mail:
Ford Customer Relationship Center
P.O. Box 6248
Dearborn, MI 48126